OPTIMAL LIFE CENTER
Regency Elite Specifications
SCIENCE ARTICLES FAQ TESTIMONIALS
FRONT PANEL INCLUDES:BUTTONS: pH Selection Button (5 levels of alkalinity to choose from) Purify Only (No Ionization) Button
Manual Clean Cycle Button
INDICATOR LEDs FOR: Power, Ion, Purify Only, Clean Cycle, pH Level (5 Levels), and Filter Life indicatorDimensions: 14.5" H x 10.25" W x 5.75" D
- Electrical Requirements: 110 VAC, 1.0AMP (110 Watts)
- Actual Weight: 10 lbs. --- Shipping Weight: 12 lbs.
- Accidental Hot Water Shut Down: Automatic via temperature sensor
- Chlorine Removal: To < 0.05 PPM
- pH Adjustments: Five push button accessed levels plus purify only mode.
- Flow Rate: Through Ionizer: approx. 1 Gal/Min; Through purifier only: approx. 1.2 Gal/Min
- Electrode Material: Made of Platinum/Titanium
- Electrode Lifespan: 15 year minimum
- Electrode Cleaning: Automatic at power-up & every 10 min. usage. Also push button manual cleaning.
- Filter Material: 6 layer fiber, activated carbon with silver to 0.1 micron size exclusion
- Filter Life: Approx. 9-12 months (Filter Life Indicator)
- Replacement Filter Type: Easy change cartridge
- Regency Elite Replacement filter $84.00 CND
Order or call: 1-888-450-7793
IF YOU DO NOT AGREE THIS IS THE FINEST WATER UNIT FOR THE MONEY, RETURN IT WITHIN 30 DAYS FOR A FULL REFUND!
"WE HAVE NEVER HAD TO TAKE ONE BACK!"
Jupiter and Regency Elite water purifications units last 10-15 years within normal household use. The replaceable filter, used on a typical North American municiple water supply, lasts for roughly 5000 gallons. A typical family of three will use a filter in 1 year. Based on lasting 10 years and using a new filter each year, the following is your cost per gallon.
Cost per gallon amortized over 10 years
Cost per gallon amortized over 1 year
2 cents per gallon
12 cents per gallon
HOW CAN YOU AFFORD NOT TO HAVE ONE?
Special price $889.00 CDN
(price valid as of Nov 11, 2007)
To see approximate US price today, click and enter $850.00 Canadian Funds. For US credit cards, we charge in Canadian dollars which is converted by your credit card company and the amount on your statement may be approximately 3% above the price shown in the converterSuggested Retail Price:
$995.00CDN2 year warranty
Extended Warranty
3 years, the supplier pays 75% of all repair costs
4 years, the supplier pays 50% of all repair costs
5 years, the supplier pays 25% of all repair costs
The purchaser pays all shipping costs to repair depot. It is important to note that there are very few repairs required for these units as they are very dependable.
Free Shipping and Duty free to USA & Canada
or call: toll-free 1-888-450-7793
![]()
![]()
NOTICE:
Although the Regency Elite is registered as a medical device in Korea, no medical or health claims are made or implied.
The Fluoride Pre-filter
![]()
Fluoridated Water May Be Dangerous to Your Health - click for important informationActivated Alumina Filter Cartridges
General Information:
Activated alumina is a media produced by the controlled calcination of alumina trihydrate. It has been used for the removal of undesirable contaminants such as fluoride, hydrogen chloride, hydrogen sulfide, carbonyl sulfide, carbon dioxide, arsenic, alcohols and ethers.Activated alumina cartridges have been used extensively to remove contaminants at various concentration levels from various commercial and aqueous industrial waste streams.
Activated Alumina Filter Cartridges:
Activated alumina filter cartridges offer the advantages of contaminant removal and filtration treatment. The use of these cartridges eliminates problems associated with treatment using bulk media and the need for a separate filtration system. Our activated alumina cartridge is currently available in 2 3/4" outside diameter and 10" length. These cartridges are designed to treat liquids under various flow rate conditions. Contaminant concentrations and liquid flow rates are usually considered in determining the size and number of cartridges required for treatment. The activated alumina cartridges are also designed for usage in single or multiple tube vessels.The prefiltering outer shell consists of a strong, non-corroding, cylindrical polyethylene shell capped at both ends with ethylene-propylene end caps. There are approximately 0.64 lbs of activated alumina media per 10 inch equivalent cartridge (2 1/4" diameter). The flow of liquid through the cartridge is from the outer porous shell through the activated alumina media. This process allows for the removal of organic and inorganic contaminants. The liquid then flows towards the inner core through a 3 micron wound layer of polypropylene media.
Activated Alumina Filter Media Applications:
Hydrogen peroxide manufacturing
Polyethylene production
Defluorination of alkylation product streams
Water treatment (fluoride and arsenic removal)
Aqueous treatment (removal of hydrogen sulfide, carbonyl chloride and hydrogen chloride)
Off-gas treatment (carbon dioxide, hydrogen chloride and hydrogen sulfide removal)
Removal of alcohol and ether from liquid streamsActivated Alumina Media Characteristics:
Activated alumina is produced by a careful controlled calcination of alumina trihydrate blended with other absorbents such as carbon, clay minerals, molecular bonding agents and elastomeric polymersMechanically strong and highly resistant to abrasion, breakage and deterioration during usage thereby insuring a long life service
Relatively inert, non-toxic, non-corrosive and not prone to oxidation
Good performance, even at low concentration ranges
Activated Alumina Filter Cartridge Features:
Resistant to bacterial degradation (polypropylene type)
Maximum operating temperature of 180 degree F
Standard polypropylene material (standard type)
Non-contaminating
Inner polypropylene winding rated at 8 microns
Housing size that fits industry standard
Technical Specifications
Activated Alumina Media Specifications
Media Type ..................................Calcinated alumina tryhydrate
Grade ............................................12 x 32 mesh
Surface Area ............................... 310 sq. m/gm
Bulk Density, Packed ............... 42 lbs/cu. ft
Ion Exchange Capacity ............ 225 cmol/kg
Adsorption Capacity ................. 10 mg fluoride/g media
" " ................................................... 25 mg arsenic/g mediaAbove adsorption data is representative for simple solutions. Comparative ion affects or other physical conditions may reduce or enhance ion exchange capabilities of activated alumina.
Removal efficiency depends on temperature, pH, water quality, flow rate, and concentration of suspended solids.Activated Alumina Cartridge Specifications
Model ........................................ CPAL-10-PP
Media Type .............................. Activated alumina
Outer Shell ................................ Porous, high density polyethylene (nominal 70 microns)
Core Type ................................. Polypropylene
End caps .................................... Ethylene propylene, talc filled polypropylene
Micron Rating ........................... 3
Outer Diameter ......................... 2 3/4"
Length ........................................ 10"
Maximum Temperature ............ 180 degree F
List of Selected Contaminants Removed by Activated Alumina Media
Fluoride
Hydrogen Chloride
Hydrogen Sulfide
Arsenic
Alcohol
Ether
Carbonyl Sulfide
Carbon DioxideOrder or call: 1-888-450-7793
Price for Fluoride pre-filter $155.00 CND
Price for Fluoride Replacement filter $98.00 CND
Shower Filter
SF-2000 SHOWER FILTER
![]()
Why do I need a Shower Filter?
There are 2 important reasons to use a shower filter.
First, when showering, the hot water opens the skin pores and allows chlorine and other contaminants to be absorbed through the skin. Unfortunately, this goes directly into the blood stream.
Secondly, when in the shower stall, the chlorine is inhaled as it is part of the moist air you breathe.
Are there other benefits?
Yes, as the result of removing chlorine, hydrogen sulfide and other chemicals from your shower water, you will notice that you look healthier, your hair is softer, silkier, shinier and allows your skin to retain more of its natural oils.
There are also the benefits of reduced scale build-up in the tub, on the shower door and walls which means easier cleaning. The KDF media used on our filter is also bacteriostatic.
Here is a summary of the SF-2000 Shower Filter Features & Benefits
Price for SF-2000 Shower filter $67.50 CND
* Advanced formula KDF-55 filter media
* Bacteriostatic
* Removes 97% of harmful chlorine.
* Reduce offensive hydrogen sulfide odors.
* Excellent performance in hot water.
* Reduced scale build-up for easier cleaning of shower stall
* Easy installation.
* Quick flushing system.
* Smooth water flow.
* Lasts up to 7500 gallons.
* Innovative design for maximum shower head height.
* Replacement cartridge available.
SF-2000 Replacement Cartridge $44.50 CND
or call: toll-free 1-888-450-7793
![]()
![]()
SCIENCE ARTICLES FAQ TESTIMONIALS
BACK HOME